浅谈水库水温计算方法

在收集国内外水库水温分布预测方法的基础上,简要分析了影响水库水温分布的影响因素,介绍了当前常用的水库分层判别方法及水库水温预测的经验法,重点介绍了当前流行的数学模型法,同时对各方法的优、缺点及适用性进行了比较评价。     

关于CEA混凝土膨胀剂的若干技术问题--与游宝坤同志讨论

作者阐述了CEA膨胀剂混凝土的膨胀量较大，干缩小，抗裂性能良好的特性，CEA与粉煤灰掺用提高强度，改善界面过渡层的性质，提高耐久性；CEA混凝土无Ca（OH）2溶出问题。文中列出GBJ119应用技术规范，说明CEA可用于防水工程。     

关于瞬态应力强度因子和裂纹扩展加速度之间的关系探讨

将动态焦散线法与高速摄影技术相结合,本文记录了高分子材料悬臂梁内裂纹扩展加速、减速过程。一方面,利用动态焦散线可确定扩展裂尖的瞬态应力强度因子;另一方面,利用最小二乘法将裂纹扩展的水平、垂直位移分量拟合成时间(t)的四次多项式,描述了裂纹扩展方向、裂纹扩展加速度以及裂纹扩展加速度与动态应力强度因子的关系。结果表明:裂纹扩展加速度与动态应力强度因子之间存在一定的依赖关系;利用最小二乘法将裂纹扩展的水平、垂直分量拟合成时间(t)的四次多项式,可以对裂纹的扩展方向、加速度进行定量分析。     

柴北缘逆冲带侏罗系油气成藏主控因素分析

柴达木盆地北缘地区经过多年勘探,发现了以侏罗系为烃源岩的冷湖、南八仙及马北等油气田,通过对该地区石油地质条件综合分析,认为柴北缘侏罗系油气成藏主控因素具有以下特点:烃源岩的分布、成烃演化及生烃中心的位置控制着油气相态的分布格局;古近纪晚期和新近纪中期是柴北缘地区油气运聚的关键时刻,燕山期发育的古隆起和早第三纪发育的构造带是控制油气运聚的重要构造因素;中、新生界之间发育规模较大的区域性不整合面,第三系发育区域性分布的渗透性砂岩,为油气侧向运移提供了有利条件;晚喜马拉雅期盆内主控断裂及其派生断层的强烈活动,为油气垂向运移提供了有利条件。     

从限额设计谈投资控制

文章根据设计阶段投资控制的现状及存在问题,提出只有在设计行业全面推行限额设计,深化设计阶段的投资控制工作,才能从根本上体现全过程投资控制的理念,提高投资控制效果,节约建设工程总投资。     

大平房油田曲流河储层沉积微相特征及注水调整研究

复杂断块大平房油田东营组储层为陆上曲流河相沉积类型，其中曲流河点坝相储集层为主要产油层，而该油田此相带储集层规模较小，表现为储层物性较差，连通性差，开采过程中生产动态复杂，造成注采体系不完善，水驱效果差，水驱采收率较低，通过以岩心分析资料和大量的测井、生产动态资料为基础，对各种沉积相标志的分析，研究了曲流河储集层微相组成及主要沉积微相特征，综合评价出Ⅱ、Ⅲ类储层，找出影响注水开发效果的各类因素，有针对性地对注采系统进行调整研究，提高水驱控制程度。     

The Importance of Shared Environment in Infant-Father Attachment: A Behavioral Genetic Study of the Attachment Q-Sort.

In this first behavior genetic study on infant-father attachment, we estimated genetic and environmental influences on infant-father attachment behaviors and on temperamental dependency, both assessed with the Attachment Q-Sort (AQS; B. E.Vaughn & E. Waters, 1990; E. Waters, 1995). Mothers of mono- and dizygotic twins (N = 56 pairs) sorted the AQS with a focus on the infant's behaviors in the presence of the father. Genetic modeling showed that attachment was largely explained by shared environmental (59%) and unique environmental (41%) factors. For dependency, genetic factors explained 66% of the variance, and unique environmental factors including measurement error explained 34%. Attachment to father appears to be, to a significant degree, a function of the environment that twins share. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

碳纤维增强混凝土构件正截面计算的双界限系数法

以材料的力学性能分析为基础，利用双界限系数将碳纤维增强混凝土受弯构件划分成三种正截面的破坏形态，对每一种破坏形态，建立了单、双筋矩形截面极限承载力的计算式，使碳纤维增强混凝土构件正截面计算与现行的规范相一致。     

The rate of corrosion of concrete reinforcement and possibilities of its mathematical modelling

The paper describes a method for the mathematical modelling of steel reinforcement corrosion rate. This method is based exclusively on experimental results and expression of the influence of significant corrosion factors in the form of functional relations. The method takes into account the reality of the effects of corrosion factors, their contigency and complexity, and various circumstances occurring in practice. It represents one way towards the development of methods for the prediction of service life of reinforced concrete and structures.     

Tannins/melamine–urea–formaldehyde (MUF) resins substitution of chrome in leather and its characterization by thermomechanical analysis

A new sulfonated melamine–urea–formaldehyde (MUF) resin of relatively low melamine content, prepared according to a sequential formulation, has been shown to be highly effective when coupled with different natural vegetable tannins to produce leather with the same good characteristics of leather prepared with chrome salts. In particular, the antishrinkage effectiveness of the leather prepared according to the new approach is comparable to that obtained with chrome tanned leathers. The comparison of the traditional leather shrinkage temperatures test method with a new thermomechanical analysis (TMA) test method in tension yields thermograms presenting three major modulus of elasticity (MOE) peaks. These are closely connected to molecular level phenomena determining the shrinkage temperature of leather. The three determining parameters appear to be as follows: (1) The average value of the temperatures at which the three MOE peaks occur: the higher the value of this average, the lower is the shrinkage of leather. (2) The average of maximum MOE values of the TMA peaks: the higher this average is, the better is the leather in regard to antishrinkage effectiveness. This means the leather maximum MOE at each peak is a measure of the resistance to the contraction force induced by heat. (3) The relative intensity of the first TMA peak in relation to the second: the higher the value of the MOE for the first TMA peak is in relation to the second peak, the lower the leather shrinkage appears to be. However, it has not been possible to better define or quantify this latter effect. This new TMA test method in tension has also yielded a mathematical relationship correlating the thermogram peak temperatures and MOE averages with the traditional shrinkage temperature to a high degree of confidence. A previous TMA test method, in compression, has proven to yield more problematic and finally not very reliable results when one needs to apply it to a wide variety of different cases. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1889–1903, 2003